RepRap Rostock

Rostock #0

Rostock #1

Rostock #2

Rostock #3

Properties

Build Volume	141 x 141 x 400 mm (5.5 x 5.5 x 16 in.)
Layer Resolution Low	200 micron (0.008 in.)
Layer Resolution High	100 micron (0.004 in.)

Documents

Rostock-MAX-v2-Assembly-Guide-2ndEdition.pdf

Brand	RepRap
Machine type	3D Printer
Technology	FDM (Fused Deposition Modeling)
Materials	PLA, Wood PLA, Chameleon plastic, PETG, PLA+, ColorFabb XT CF20 (PET-G), Foaming PLA
Website	http://reprap.org/wiki/Rostock
Average Price	Contact manufacturer

About Rostock

Rostock is a linear delta robot 3D printer prototype, built in 2012 by Johann in Seattle, USA.

Features:

Build volume: 200x200x400 mm (8x8x16 inches).
Footprint: 300x350 mm (12x14 inches).
Print surface: 200x200 mm heated glass which never moves.
Mass of end effector with hotend: less than 50 grams.
Positioning speed: up to 800 mm/s in all 3 directions.
Positioning accuracy: at least 30 steps/mm in all 3 directions.
Simplicity: fewer than 200 parts.
Hardware cost: less than $500 USD.