Reviews
4.7/5(24 reviews)

 

Showing 1-10 of 24 items.
29 Nov 2020
Speed
Quality
Communication
Great prints. However, took longer than most I've ordered from on treatstock.
Printed on: Lulzbot Taz 6
Material: Different materials Different colors
Review image #2310241Review image #2310240Review image #2310242
21 Oct 2020
Speed
Quality
Communication
As the team had warned me, printing with Carbon Fiber reinforced material is extremely difficult, and resulting products aren’t of the same precision & visual appeal, but the material strength was great, and quality was as good as the material permits.
17 Oct 2020
Speed
Quality
Communication
Awesome prints! Thanks again!
Printed on: Lulzbot Taz 6
Material: Different materials Different colors
Review image #2178439Review image #2178438Review image #2178437
21 Sep 2020
Speed
Quality
Communication
Printed on: Lulzbot Taz 6
Material: Rubber (TPU)
Black
Review image #2123854Review image #2123853Review image #2123852
21 Sep 2020
Speed
Quality
Communication
Printed on: Lulzbot Taz 6
Material: Different materials Different colors
Review image #2123775Review image #2123776Review image #2123777
22 Aug 2020
Speed
Quality
Communication
Great. I'll continue more purchase on here
Printed on: Lulzbot Taz 6
Material: PLA
Black
Review image #2050102Review image #2050103Review image #2050104Review image #2050101
30 May 2020
Speed
Quality
Communication
Printed on: Lulzbot Taz 6
Material: PC
Black
Review image #1803399Review image #1803402Review image #1803401Review image #1803400
21 May 2020
Speed
Quality
Communication
Good print. Thank you
Printed on: Lulzbot Taz 6
Material: Rubber (TPU)
Black
29 Apr 2020
Speed
Quality
Communication
Layer Resolution: 50 micron - 500 micron Infill: 20% (default) Material & Color: PC Black I needed to print a replacement part for the Steam Controller right bumper. Apparently this is a common failure for the controller. I took a blind guess that the polycarbonate print would be strong enough, but it wasn't. The same part that failed before snapped off. Also, the tolerances were a bit off. I had to bore out 2 holes a little larger so that a metal shaft from the controller would fit. I also had to sand down a couple pegs on the reverse side so that the part would fit into the controller. It was during my handling the part with a filer that the part snapped. I don't really blame anyone for this, but it still sucks. I wonder if I wouldn't have had any of these problems if I had printed in a different material or tolerance. 0.5 mm seems a bit large now that I think about it. Oh well. I'll probably try to epoxy it together later.
Printed on: Lulzbot Taz 6
Material: PC
Black
Review image #1701356Review image #1701355Review image #1728227Review image #1728228Review image #1701358Review image #1701357
27 Apr 2020
Speed
Quality
Communication
Printed on: Lulzbot Taz 6
Material: PC
Black
Review image #1682920Review image #1682917Review image #1682918Review image #1682916Review image #1682919

Print 3D Models Here

Upload your 3D model Order 3D print

Need something special?

Request a Free Quote